| ESSENCE : with CVO Fire Ribbon™ burner technology. This is a smaller "hole-in-the-wall" fireplace which has been designed to suit modern homes where a small feature fireplace is required. Using the same open flame burner technology as our other ribbon fires and is suitable for homes with a class2 flue system. At 6.8kw this fire still has a beautiful flame quality and is a practical source of heat. The open fronted fire has an overall width of 650mm and a depth of only 310mm making this fire suitable for both modern and older homes. To complete the luxury of this fire there is a fully sequential remote control - ON/OFF and UP/DOWN all from the comfort of your armchair. |
|
"A Beautiful Hole in the Wall Fireplace"
The Essence is suppplied as a complete fireplace suite for easy installation into a suitable opening. The enclosure is supplied pre-fitted with the remote control dancing ribbon flame gas burner ready to slide into the fireplace opening.
A slimline 125mm gather unit is available and this can be prefitted to the chimney before insertion of the enclosure. The enclosure in fabricated from high quality black steel and has brushed stainless shelves which create a mirror effect to enhance the flame. There is a choice of brushed stainless or black trim to complete the design.
|
|
|
|
|
|
Key Features:
- Hole in the wall gas fire with CVO ribbon flame gas fire burner technology.
- Full sequence battery operated remote control with hand set and wall switch - up/down & on/off.
- Supplied as a complete gas fireplace suite including gas fire burner, enclosure, remote and trim.
- A miniture gather is available to connect a 125mm liner is available upon request.
Purchasing Options:
- Natural Gas 6.8kW (G20/G25) or LPG/Propane 3.8kW (G30/G31) remote control gas burner.
- Enclosure Options
- Black Steel with brushed stainless shelves.
- Hand Polished Bronze enclosure available upon Request.
- Brushed stainless steel enclosure available upon Request.
- Fascia Options
- Satin Black Steel.
- Brushed Stainless Steel.
- Other fascia designs upon request.
- Optional Gather available upon request.
Technical Features:
- Fascia Size = 656mm (w) x 405 mm (h) [see technical specification]
- Enclosure Size = 540mm (w) x 370mm (h) x 310mm (d)
- ODS (Oxygen Depletion Sensor) & FFD (Flame Failure Device) built in for additional safety.
- Gather unit has a 125mm Spigot for connection to a flue liner.
- CE approved for supply across Europe.
How to Order:
- Telesales - Call - 01325-301020 to place your order.
- Showroom - On display in our FireVault™ Retail outlets.
- Export - Contact us for details orf our Export Distributors.
- Bespoke and custom enquires welcome.
Other "Ribbon" Burner Fireplaces:
|
|
Fire Ribbon™ is a Registered Trademark |
