Less Than 7kw Gas Fires
These 7kw gas fires listed below have a power input rating of less than 7kw and don’t require an air vent in the room. The requirements of these fires is a minimum flue size of 125mm, pre-cast or class 2 brick chimney. Please read the specification sheet on the individual product page for more details. All of these gas fires and fireplaces less than 7kw within this range are examples of exquisite, modern designs and use our unique gas fire burner technology (which is not available through any other company). All of our 7kw gas fires carry full CE approval and can be supplied across Europe, complete with gas fire ventilation and air vents where applicable. If in doubt about the suitability of any fire for your home, please call us on 01325-301020 to discuss your installation requirements in detail.
High Efficiency – Glass Fronted Fires
Our new high efficiency gas fires incorporate the latest gas fire design technology and have efficiency ratings of 75% or greater, bringing energy costs down. These fires can provide twice the heat of a conventional fire for 60% of the cost. Most fires are available with thermostatic remote control to make changing the light or heat output easy. Our gas fires under 7kw are a great option for contemporary and traditional properties alike, combining stylish design and smart functionality for any homeowner.
This modern gas fires incorporates the latest gas fire burner technology and has efficiency ratings of up to 80%. This glass fronted is built to the latest British and European standards for Safety and Energy Efficiency. BS7977:2013 and EN613. Operated by a modern thermostatic remote control system with digital handset. The fire is 920mm long, the same as a 40″ TV, and is installed in our Northern fireplace showroom.
High Efficiency wall mounted gas fire with Pebble Basket burner. This energy saving design has a class 1 efficiency rating and is suitable for any chimney type. The installation process is easy, and the fire can be operated by a remote control. There is a choice of black or stainless fascia.
Approved with a shelf above which will allow for a TV to be installed above. No air vent required.
High Efficiency wall mounted gas fire with ribbon gas burner and pebble set. Energy saving design with a class 1 efficiency rating. Suitable for any chimney type, this easily installed fire can be operated by remote control with a choice or black or stainless fascia depending on your preference.
High efficiency wall mounted gas fire. This gas fire utilises any existing chimney and can be used to upgrade an old inefficient fire – providing heat and saving money. No additional room ventilation is required. Operated by a thermostatic remote control system, you can set the desired temperature and sit back and let the gas fire do all the work! The blade gas fire has a class 1 energy efficiency certificate and SAP rating. Heat input 4.6kw.
High Efficiency Inset Gas Fires
Inset gas fires are another beautiful way to include a stunning gas fire into your home. With minimal or no projection into the room, our less than 7kw inset gas fires can be installed into a traditional surround. We supply the burner and a wide range of surrounds. “Its time to remove that old wasteful inset gas fires and replace it with a high quality, energy saving CVO Fire”.
The BAILEY, glass fronted inset gas fire features a modern gas burner with fireplace logs. This fire is tested to the latest CE standard for energy efficiency and has a class 1 rating. The bailey is available to buy as a replacement for any existing inset gas fire or as a complete new traditional fireplace with a surround, hearth and backing plate. Running costs on this fire are approx – 8p/hour. No additional room ventilation is required.
This smaller version of our high quality fire ribbon includes the same gas burner technology with a smaller width. This remote control gas fire is available with either a brushed, black or polished enclosure and a wide range of natural stone fascias. Approved for Natural Gas or LPG with no air vent needed, class 2 or 125mm flue liner. Enclosure depth only 320mm. Operated by a modern thermostatic remote control system with digital handset.
The bordino is a smaller ribbon gas fire with a full stone enclosure and trim. This is a small but elegant gas fire designed for modern homes with a class 2 chimney where a feature gas fireplace is required with minimal depth.
Choose from Portuguese Limestone or African Black Granite to create a very stunning beautiful fireplace. Operated by remote control.
The Essence Ribbon Fire is both delightful and petite. Designed as a feature fireplace for smaller rooms or for homes with a class 2 chimney system. The fire is operated by a fully sequential remote control and is available with either a satin black or brushed stainless steel fascia trim. The essence is supplied as full cartridge to make installation easy and has the option to add a gather which will increase the efficiency rating of the appliance and return more heat to the room. Operated by a modern thermostatic remote control system with digital handset.
Hole in the Wall Gas Fires
We have a full range of designer hole in the wall gas fires under 7kw with minimal flue size depth requirement. There are no air vents required with these designs. Designed with style in mind, these gas fires will bring a room to life and create a focal point in your home of exceptional beauty. There are double sided or see through versions of all these fires.
The MADINI gas fireplace is 850mm wide and features a remote control gas burner which can be fitted with either logs or pebbles. The standard fire is installed as “trimless” as shown left however a trim can be added if required. There are various finishes – black steel or polished steel and there is also a double sided or see through version available upon request. Requires no air vent in the room. Operated by a modern thermostatic remote control system with digital handset. Decide your room temperature and the handset will automatically adjust the flame.
A truly unique “curved” gas burner with an impressive floating flame. There are many installation options with this gas fireplace – various enclosures and trims available. Shown left with a raised metal fascia.
This ICONIC design was created in 1999 and started the trend which has seen a number of “imitations” created. Winner of the Price of Wales Design Award the Fire bowl features gas burner technology which creates a sparkling undulating sea of blue incandescence to gentle peaks of yellow flames.
The Small oval is 490mm Wide (tip to tip) and is available in White, Black or Sand Stone, or Hand Polished Aluminium or Bronze.
Fire Basket Gas Burners
We have a wide range of gas fire baskets and burners available for use in bespoke or custom made fireplace designs. This includes fire grate burners (shown left). ribbon gas burners up to 1800mm wide, contemporary designer gas burners for something creative and different and we also have gas burners for outdoor fireplaces.
Bespoke Fireplace Design
Shown left: “Bespoke” Fire Ribbon installed in a Villa in Northern Italy.
This bespoke gas fire was designed using our Ribbon burner technology to create a stunning feature fireplace for the client. Using our ribbon flame gas burner technology there are many design options. If you have a design idea call 01325-301020 to discuss.
Need a custom designed 7kw gas fireplace? We specialise in designing bespoke gas fireplaces for clients using our unique burner technology, developed specifically for our gas fires. We have over 30 unique gas fires less than 7kw available to choose from. We are also available to design bespoke ethanol fires, so we’d love to make something that perfectly fits your requirements!
To discuss your requirements please call 01325-301020 or fill in our online contact form.